|
Hard starting after 3screw mod ,,,,
#38809
10/06/08 08:17 PM
|
Joined: Nov 2007
Posts: 9
300stw
OP
Junior Member
|
OP
Junior Member
Joined: Nov 2007
Posts: 9 |
i have done the 3 screw mod and 42.5 jet, this bike is hard to start when cold,, did the turn off gas run till dry thing also,,, but,,, i found out if i pull the choke cable out of the socket on the carb which must pull the choke out farther, the bike starts right up no matter how cold, thoughtss, its a pain to put the cable back in the rubber grommet,,,,2007 xt 225, 3 screw mod and z1 mod,,
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: 300stw]
#38810
10/06/08 08:24 PM
|
Joined: Sep 2008
Posts: 630
Magoo
Silver Member
|
Silver Member
Joined: Sep 2008
Posts: 630 |
I just did the Z1 mod and the 127.5 main jet and 2 turns out on my fuel screw (stock 140 jet) and now I don't have to run the bike for 3 or 4 minutes before I can start riding! My fuel screw was out almost 3 1/2 turns (from the factory. I'd try the 2-turn setting. . . you didn't say how many turns out the fuel screw was before you adjusted it!
Be mindful that a DOUBLING in velocity results in a QUADRUPLING of any impact force. ALL RIDE IN/ALL RIDE OUT
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: Magoo]
#38811
10/06/08 08:33 PM
|
Joined: Jun 2005
Posts: 4,684
Moto Psycho
Platinum Member
|
Platinum Member
Joined: Jun 2005
Posts: 4,684 |
Magoo... Your stock main jet was a 140? It should have been a 125 main. They come from the factory lean to meet EPA regulations. Or was that a typo, and you were talking about your pilot jet being the stock 40....
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: Magoo]
#38812
10/06/08 08:45 PM
|
Joined: Nov 2007
Posts: 9
300stw
OP
Junior Member
|
OP
Junior Member
Joined: Nov 2007
Posts: 9 |
STOCK WAS 2 TURNS, I AM AT 3 NOW TRIED UP TO 4 DOWN TO 1 , 2.5-3 IS BEST FOR IDLING
07 xt 225
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: 300stw]
#38815
10/06/08 09:17 PM
|
Joined: Jun 2008
Posts: 121
ozarkjeep
Member L1
|
Member L1
Joined: Jun 2008
Posts: 121 |
mine was hard starting and running poorly with the 42.5 pilot jet also.
I tried 1 turn-3 turns, way too much fuel on that circuit with the stock airbox and filter, and modded exhaust.
I went back to 40 pilot and its fine at 2.5 turns.
new to the xt225, but loving it
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: 300stw]
#38820
10/06/08 10:45 PM
|
Joined: Jun 2007
Posts: 333
Road Rash
Member L3
|
Member L3
Joined: Jun 2007
Posts: 333 |
i have done the 3 screw mod and 42.5 jet, this bike is hard to start when cold,, did the turn off gas run till dry thing also,,, but,,, i found out if i pull the choke cable out of the socket on the carb which must pull the choke out farther, the bike starts right up no matter how cold, thoughtss, its a pain to put the cable back in the rubber grommet,,,,2007 xt 225, 3 screw mod and z1 mod,, Sounds like your choke cable is separated in the center coupler .
Steve, Hollywood Fl. 2000 XT 225
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: Road Rash]
#38849
10/07/08 01:54 AM
|
Joined: Nov 2007
Posts: 234
doxbike
Member L2
|
Member L2
Joined: Nov 2007
Posts: 234 |
[/quote] Sounds like your choke cable is separated in the center coupler . [/quote]
I'll second that-mine was disconnected and from the look of the grease, had never been. Take off the tank, pull back the rubber cover protecting the coupler-easy fix, if that's the problem
Which is more fun-the XT in the dirt or the XL in the twisties?
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: doxbike]
#38878
10/07/08 02:03 PM
|
Joined: Nov 2007
Posts: 9
300stw
OP
Junior Member
|
OP
Junior Member
Joined: Nov 2007
Posts: 9 |
WILL TAKE A LOOK TONIGHT AND GET BACK TO YOU GUYS THANKS,,,
07 xt 225
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: Moto Psycho]
#38887
10/07/08 04:34 PM
|
Joined: Sep 2008
Posts: 630
Magoo
Silver Member
|
Silver Member
Joined: Sep 2008
Posts: 630 |
Magoo... Your stock main jet was a 140? It should have been a 125 main. They come from the factory lean to meet EPA regulations. Or was that a typo, and you were talking about your pilot jet being the stock 40.... Yes my main jet was a 125 and yes the stock pilot is a 40. . . . sorry about the confusion!
Be mindful that a DOUBLING in velocity results in a QUADRUPLING of any impact force. ALL RIDE IN/ALL RIDE OUT
|
|
|
Re: Hard starting after 3screw mod ,,,,
[Re: 300stw]
#43912
01/31/09 02:57 PM
|
Joined: Nov 2007
Posts: 9
300stw
OP
Junior Member
|
OP
Junior Member
Joined: Nov 2007
Posts: 9 |
I finally took the tank off and yes the choke cable is not connected together. starts now even at 15 below... thanks for the tip
07 xt 225
|
|
|
|
Board Upgrade:
Board upgrade to V7.7.3 has been completed on Monday Feb 3rd 2020. Ride safely.
Enjoy the new software!
|
|
0 registered members (),
16
guests, and 1
spider. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums38
Topics16,835
Posts151,328
Members6,012
|
Most Online279 Dec 6th, 2019
|
|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|