|
Zeta Levers Fit - DRC Oversized Pegs Dont -
#51372
07/30/09 03:04 AM
|
Joined: May 2009
Posts: 218
Alacrity
OP
Member L2
|
OP
Member L2
Joined: May 2009
Posts: 218 |
Battin' .500. The old man did me right for my B-day - we wont tell him the pegs need some work. As you can see the DRCs go about 1 1/4 inches - stock is about 7/8 inch. Otherwise they appear to bolt up fine. Nothing a bit of grinding and some epoxy coat wont fix. Very happy - $35 and room for my feet. I'll confirm fit for everyone once I get to mod them. Since theres been some question, I can confirm Zeta 3 finger ZE41-3161 Brake and ZE42-3160 fit the XT250. They both fit the WR250R, TTR250, Serow 86- Tricker '04 - assuming any levers cross for these. They are a nice piece of kit. Much reduces effort and I can keep 2 fingers on the bar. Likey.
Luck Alac
"Even if you're on the right track, you'll get run over if you just sit there." W. Rogers
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Alacrity]
#51388
07/30/09 02:32 PM
|
Joined: Jan 2009
Posts: 598
LRJ
Bronze Member
|
Bronze Member
Joined: Jan 2009
Posts: 598 |
None of your images are showing up for me, Alacrity. Just box icons with question marks. I've come across this before in this forum. If they show up for you, maybe its my browser.
LRJ Take time to play. / '07 xt225/'00 TT-R250 Tusk Bark Busters & Hand Guards / 3KCustoms Aluminum Rack
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: LRJ]
#51389
07/30/09 02:51 PM
|
Joined: Jul 2009
Posts: 229
OhioTim
Member L2
|
Member L2
Joined: Jul 2009
Posts: 229 |
None of your images are showing up for me, Alacrity. Just box icons with question marks. I've come across this before in this forum. If they show up for you, maybe its my browser. No, I don't see any either......
OhioTim
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: OhioTim]
#51390
07/30/09 02:53 PM
|
Joined: Jul 2005
Posts: 11,645
Reggie
MR SEROW!
|
MR SEROW!
Joined: Jul 2005
Posts: 11,645 |
Hi Chaps & Chapesses,
and my browser (Safari) also cannot view them.
Reggie
Team Cabra, Brazilian XT225, Team Ukulele, Japan import XT225, a 250 to be named and loads of 2 stroke Kawasaki AR's!
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Reggie]
#51393
07/30/09 04:24 PM
|
Joined: Jul 2009
Posts: 229
OhioTim
Member L2
|
Member L2
Joined: Jul 2009
Posts: 229 |
It must be the web site, once I copied the link into another browser window and seen the photo, it showed up in the post.... try looking at this in your browser then refreshing this page.... http://lh3.ggpht.com/_82LRCpo5bkc/SnENFM...Footpeg%201.jpg
OhioTim
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: OhioTim]
#51394
07/30/09 04:38 PM
|
Joined: Sep 2008
Posts: 630
Magoo
Silver Member
|
Silver Member
Joined: Sep 2008
Posts: 630 |
We get a message that the requested URL is NOT found. . . even AFTER refreshing THIS page.
Be mindful that a DOUBLING in velocity results in a QUADRUPLING of any impact force. ALL RIDE IN/ALL RIDE OUT
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Magoo]
#51397
07/30/09 05:04 PM
|
Joined: May 2009
Posts: 218
Alacrity
OP
Member L2
|
OP
Member L2
Joined: May 2009
Posts: 218 |
Odd now its not working for me - Picasa trouble. Dunno Cant edit the OP either. Album is here - hate to tease you XT250 Mods
Luck Alac
"Even if you're on the right track, you'll get run over if you just sit there." W. Rogers
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Alacrity]
#51399
07/30/09 05:12 PM
|
Joined: Jul 2005
Posts: 11,645
Reggie
MR SEROW!
|
MR SEROW!
Joined: Jul 2005
Posts: 11,645 |
Hi Alac,
just had a look at your album and the levers really suit the Serow.
Reggie
Team Cabra, Brazilian XT225, Team Ukulele, Japan import XT225, a 250 to be named and loads of 2 stroke Kawasaki AR's!
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Reggie]
#51400
07/30/09 06:07 PM
|
Joined: May 2009
Posts: 218
Alacrity
OP
Member L2
|
OP
Member L2
Joined: May 2009
Posts: 218 |
Reggie: I think so - I've always used very short levers on my Mt Bikes - and one or two fingered the controls. These are nice and short, have a comfortable travel and reduces input required. Controls make a huge difference to me - foot lever I had to bend even after adjusting, similar with the shifter. Guess I'm just sensitive Need to get the pegs modified and on - another huge difference. I'll need to re-sort my foot controls then No idea why the issue with Picasa - but its not just this board. I can screw up just about anyhting
Last edited by Alacrity; 07/30/09 06:09 PM.
Luck Alac
"Even if you're on the right track, you'll get run over if you just sit there." W. Rogers
|
|
|
Re: Zeta Levers Fit - DRC Oversized Pegs Dont -
[Re: Alacrity]
#51401
07/30/09 06:13 PM
|
Joined: Jul 2005
Posts: 11,645
Reggie
MR SEROW!
|
MR SEROW!
Joined: Jul 2005
Posts: 11,645 |
Hi Alac,
'No idea why the issue with Picasa - but its not just this board. I can screw up just about anyhting '
Don't worry, I also have such a natural ability!
Reggie
Team Cabra, Brazilian XT225, Team Ukulele, Japan import XT225, a 250 to be named and loads of 2 stroke Kawasaki AR's!
|
|
|
|
Board Upgrade:
Board upgrade to V7.7.3 has been completed on Monday Feb 3rd 2020. Ride safely.
Enjoy the new software!
|
|
0 registered members (),
28
guests, and 0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums38
Topics16,835
Posts151,327
Members6,012
|
Most Online279 Dec 6th, 2019
|
|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|