Fab Ads
2001 xt225 NE TN parts bike Pawel 02/10/22 03:33 PM Hi, I joined the forum to list my bike for sale.
2001 xt225
Purchased it from a friend of mine who lost the title. Rode it around my property for few months and it ran great, bike stopped running and I have no time or skill to fix it.
Posting it here as a parts bike, located in TN, near Mountain Cuty.
Not sure how to post pictures here
Best offer
4 413 Read More
XT 225 Cogent Dynamics Fork Springs Scott Blunk 01/23/22 05:43 PM I am selling a set of .40kg/mm Straight Rate Fork Springs for an XT 225. Bought new from Pro Cycle. They are made by Cogent Dynamics. Bought them in Late 2020 and used them over this last summer 2021. They work great. I lost near 50 pounds and they are a bit stiff now. Went back to the stock springs. $75.00 Plus shipping. Email me at and I can send pictures.

2 310 Read More
XT 225 DG Exhaust Pipe Scott Blunk 01/23/22 05:37 PM I am selling a Brand New DG Exhaust Pipe for a XT 225. I bought it last year during the pandemic. I did not use it. Comes with a 1.25 inch quiet core. Bought the setup from Pro Cycle in December 2020. Paid $360 before taxes. Will sell the unit for $150.00 plus shipping. Email me at and I will send pictures.

1 276 Read More
2003 XT225 - 7800 miles - $2850 OBO - San Jose CA JMo 01/18/22 12:28 AM Howdy all - I have for sale a 2003 model Yamaha XT225 aka. Serow - 7800 miles - $2850 OBO.

[Linked Image from]

This bike belongs to my partner, who has owned it since 2010 - prior to that there were two previous owners, the most recent being a family friend.

It runs really sweetly and has always been well-cared for mechanically, but does bare the marks of a trail bike used, well, on the trails - albeit infrequently... (see photos)

In that regard it has covered just under 7,800 miles from new.

Bearing in mind it is now approaching 19 years old, it has stood the time really well, with just some deterioration to the paint on the engine fins and some scuffs on the frame by the foot-pegs, plus the odd scratch here and there from the inevitable drop.

All the electrics work perfectly, and it starts and runs very sweetly. Indeed the only thing which doesn't appear to work is the steering lock (the ignition itself is fine).

It comes with a number of accessories and upgrades, typically what you'd want fitted on these bikes anyway:

• Clark 4.1 gallon tank

• Fat-bar saddles and ProTaper CR High bend bars (and new ProTaper grips)

• DMO wide foot-pegs

• ProMoto Billet rear rack

• Smaller turn-signals front and rear

• 13/50T sprockets (stock sprockets also included)

• Polisport shorty front fender (to avoid the floppy ant-eater look)

Otherwise the bike has the original factory plastics, and the seat is in excellent condition. Black DID rims came stand from this model year on, and it has the factory skid plate installed.

Bike is also registered until August 2022 in California, otherwise you'll need to make you own arrangements if purchasing from out of State.

I'm happy to answer any further questions and entertain all serious offers - I could have listed this for $3000 and done the dance with you, but to avoid wasting time please understand I am looking for very close to the asking price of $2850 OBO.

Jenny x

A few more photos:

[Linked Image from]
photo. OEM headlamp, aftermarket turn-signals and short fender.

[Linked Image from]
photo. Promoto Billet rear rack and Clarke 4.1 gallon tank.

[Linked Image from]
photo. all dash and lights/electrics in working order. Just under 7800 miles. ProTaper bars in 1&1/8th adapter saddles.

[Linked Image from]
photo. this model year came standard with black DID rims and skid plate.

[Linked Image from]
photo. left side of engine - paint flaking on cooling fins, and some scratches on the stator cover...

[Linked Image from]
photo. ...similarly on the right hand side of the engine, a few scuffs on the clutch cover, and some paint deterioration on the cooling fins.

[Linked Image from]
photo. factory plastics still in very good condition. note Michelin T63 tires front and rear approx. half worn - still plenty of life in them.

Any further questions please ask here, or PM me!
4 354 Read More
07 XT225 for sale RhodyRomes 07/12/21 03:13 PM 2007 Yamaha XT225

Facebook listing:

4k miles, It’s garage kept, clean and in excellent running condition. Everything works perfectly, maintenance is up to date and typical worn parts have been replaced. This bike has the upgrades you want on a dual sport/small adventure bike! See below for details. I just rode the NEBDR on it and it performed flawlessly.

Maintained with Mobile 1 Racing 4T 10W-40 synthetic oil
Uni Air filter
Valve clearances within spec.

Suspension upgrades:
Front: replacement springs - Cogent .42 kg/mm springs (still have the stock springs)
DDC Drop in Damper Cartridges.
Rear: replacement spring - Cogent 7.2kg/mm replacement Spring (still have the stock spring)

Z1 mod
Snorkel removed (still have it)
Jetted for sea level - (genuine Mikuni) Main: 130, Pilot: 42.5 (still have stock jets)

Replacement handlebars ProTaper SE ATV High bend. (still have stock bars)
1” - Tusk handlebar riser
Replacement levers: MZS Pivot Levers - blue
Pro Taper pillow grips

Foot pegs: Extra wide DMO footpegs

Dual USB charger hardwired to the charging system
Battery Trickle charger connector wired directly to battery
LED Headlight - H4 bulb Cyclops 10.0 ULTRA
LED Tail Light - JDM ASTAR High Performance Super Bright

Front: Pads: EBC Disc Brake Pads
Rear: Shoes: EBC Brake Shoes

DID heavy duty chain
Sunstar rear sprocket (45T)
JT front sprocket (16T) - have Suntar 15T as well

Gel mod
Airhawk seat cover

Happy Trails soft pannier side racks
Immix Racing rear rack

Kenda 270s, six months old
12 1,642 Read More
17 xt 250 for sale yamaha rider 19 06/27/21 09:51 PM Hi guys I have a very clean 17 xt 250 for sale garage kept senior owner in ft myers fl with fl title only 1300 miles has new cargo rack and bark busters and new battery runs great call ron @ 239 994 4327 thanks for looking !
3 570 Read More
Corbin seat for xt225 Jt110 06/16/21 03:19 PM Nice used Corbin seat for the xt225. Padding and cover in great shape, no rips. Huge comfort improvement over stock saddle. $300 shipped to CONUS.

[Linked Image from]

[Linked Image from]

[Linked Image from]

[Linked Image from]

[Linked Image from]
4 665 Read More
2007 xt225 WV kc8jdc 05/19/21 11:56 PM Not mine but about 40 minutes away in central West Virginia.

2007, 2708 miles, $2600
2 480 Read More
XT225 DMO foot pegs Visser 05/19/21 10:54 AM Hey guys,

Unfortunately I sold my XT225, going bike free for a couple years while I pay off some debt.

Before selling it I put the stock pegs back on, so I have a pair of DMO pegs for sale and figure this would be the best place to advertise.

It would be best if someone else in Canada wanted these, as I have already paid any duty and the shipping here, but if not then I could send to USA.

What is a used set of pegs worth? Shipping to Canada or the USA would probably cost around $15-$20 or so.

[Linked Image from]

Let me know what you think they are worth and see if we can make a deal. I have no use for them anymore.
2 560 Read More
'06 XT225 for Sale in Phoenix.. Az4x4 04/30/21 06:26 PM
Not my bike, but someone just posted a great looking '06 XT225 for sale on Craigslist in Phoenix..
5 781 Read More
Web & Site Search
Custom TO Customer
Specialty Resource
Fab Ads
Boardcaster Updates

Board Upgrade: Board upgrade to V7.7.3 has been completed on Monday Feb 3rd 2020. Ride safely. Enjoy the new software!

Who's Online Now
0 registered members (), 16 guests, and 1 spider.
Key: Admin, Global Mod, Mod
ShoutChat Box
Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.
Top Posters(All Time)
Reggie 11,645
Muniac 6,389
alexd 5,915
Az4x4 4,960
Moto Psycho 4,684
peejman 4,003
kris 2,366
JerryH 2,107
Paul49 2,049
Doc250 1,643
Forum Statistics
Most Online279
Dec 6th, 2019
Newest Members
steel36, Sequoyah, Pully55, Pilot13, Paulxt225
5829 Registered Users
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Powered by UBB.threads™ PHP Forum Software 7.7.3